China Neodymium And Ferrite Magnets Manufacturer & Supplier 
Need to buy encoder magnetic ring, looking for supporting Germany iC-Haus mcu chip magnetic ring, welcome to contact China Courage Magnet manufacturer, our company can provide related 62/64 poles, 126/128 poles dual code channel magnetic ring, Highly cost-effective.
The following is the introduction of our multi-pole magnetic rings suitable for use on German iC-Haus chips.
34.5mm x 25mm x 1.1mm
The ring is magnetized with 32 pairs of poles (64 poles), axially magnetized, rubberized magnetic material, with an outer diameter of 34.5mm, an inner diameter of 25mm, and a thickness of 1.1mm, which provides high signal accuracy and resolution, and is used in conjunction with the MU-150 chip from ICHAUS in Germany.
Dual channel encoder code disk magnet 56mm OD drawing for IC-Haus
29mm x 15mm x 1.1mm
Axial 32 pairs of poles (64 poles) magnetized, rubberized magnetic material, 29mm outer diameter, 15mm inner diameter, 1.1mm thickness, provides high signal accuracy and resolution, widely used for speed measurement, position and angle measurement, used with IC-MU chip from ICHAUS, Germany.
49mm x 25mm x 2mm
Axial multi-pole 64 poles magnetization, rubber magnet + stainless steel bottom bracket composition, outer diameter 49mm, inner diameter 25mm, thickness 2mm, with Germany ICHAUS IC-MU200 chip use.
Pictured is a 126-pole, 128-pole magnetic code disk ring magnet
56mm x 38mm x 1.1mm
64-pair pole code disk magnet, outer diameter size 56mm, hole 38mm, thickness 1.1mm, of which magnet thickness 0.5mm, stainless steel bottom bracket 0.6mm, with light weight, high precision, high stability and vibration resistance, in the case of 64 pairs of poles, angular measurement up to 20bit (1,048,576 isometrics/revolution), with the German ICHAUS IC-MU chip. MU chip from IC-HAUS.
65.1mm x 47.4mm x 1.1mm
64 pairs of poles magnetic code disk magnet, rubber ferrite + stainless steel bottom bracket composition, outer diameter size 65.1mm, inner hole 47.4mm, thickness 1.1mm, of which the magnet thickness of 0.5mm, stainless steel bottom bracket 0.6mm, has a light weight, thin thickness and other characteristics, can be adapted to dust, vibration, high temperature, oil, and other harsh environments, and the iC-MU series products with the use of the choice of incremental or When used with iC-MU series products, incremental or absolute measurement output modes can be selected.
85mm x 62mm x 1.8mm
It also adopts 126 poles and 128-pole magnetization, with similar characteristics as described above, and is suitable for use with ICHAUS' IC-MU200 chip.
If you are interested in our magnets communicate with us by email or online message on the website, tell us the size and quantity you need, thanks!
Magnetically encoded multi-pole magnetic rings products direct:
Magnetic encoder multipole ring magnet 62 64 pole OD 34mm
Multipole double coil rubber magnetic ring for encoder D49x25x2mm
Encoder single-sided multipole ferrite ring magnet 34mm x 2.5mm